Friday, 12 December 2014

Increase Internal Memory Of Android



  1. To proceed with the process you need to root your android smartphone. In case, if you are not sure whether your android phone is rooted or not, just download the ‘Root Checker‘ app from the Google Play Store. If it is not rooted, then root your android phone instantly by following the tutorial’s given here in our website.
  2. Next, backup all your datas available on your android smartphone, as the partition process will wipe it all.
  3. Next download and install the ‘Link2SD‘ app from the Google Play Store on your phone.
  4. As I have already said, this procedure requires the ClockworkMod recovery and you must have it installed on your android device. Try to install the latest version of the ClockworkMod recovery.
  5. Finally, check the battery percentage level of your android phone and make sure it is not less than 75%. If it is less, then charge your phone fully or up to 75%.

Procedure to Partition The Memory Card:

  1. First switch off your android phone and boot it into recovery mode by following any method or by using the key combination.
  2. The Touch doesn’t work in most of the Clockworkmod recovery, so use home button for selection and volume buttons for navigation.
  3. Then choose the “advanced option” and then go to partition SD card.
  4. After that, select the ext size (Make sure it is less than your memory card size).
  5. The SD Card partition will begin and it will take some time. So, wait until the process is finished.
  6. After that choose the +++++ Go Back +++++ option and reboot your device.

Instructions To Increase Internal Memory Of Android Phone With Link2SD:

  1. You have done the partitioning of SD card. So, now it’s time to download and install the latest version of the app. (In case, if you not installed the app previously as I have said in the prerequisites).
  2. Next grant the superuser permission for the Link2SD app.
  3. After granting the superuser permission, it will ask you to select the file system of your second partition. Just, choose the select ext2 format as given in the below picture.
  4. Internal Memory Partition How To Partition The Memory Card And Increase Internal Memory Of Android Phone
  5. Once you confirmed the file system, it will ask you to restart your android phone. So, do it instantly.
  6. increase internal memory restart device How To Partition The Memory Card And Increase Internal Memory Of Android Phone
  7. Once your phone is restarted, again open the Link2SD app and select the filter option and choose the “On Internal” option as given in the below picture.
  8. increase internal memory of android mobile How To Partition The Memory Card And Increase Internal Memory Of Android Phone
  9. Once you chosen that option it will show the apps from the internal memory.
  10. Select the options > Multi select. Finally choose the applications that you want to move to the internal memory.
  11. Now, again choose the action and then create the link. Choose all the three options i.e Link application file, Link dalvik cache file and Link library files and tap OK.
  12. internal memory create link How To Partition The Memory Card And Increase Internal Memory Of Android Phone
  13. It will take some time to create the link to this partition. Once it was created press OK. That’s it! all your applications will be moved to this partition.
  14. In order to link every new app that you will download to this partition, choose the options and then again choose auto link.
  15. Hereafter, whenever you download the app either from the android market or from the Google Play Store it will get saved in this partition.
status of the partition How To Partition The Memory Card And Increase Internal Memory Of Android Phone
If you want to check the status of the partition memory select option > Storage info. Don’t remove the memory card from your android phone as your apps will be linked to the SD card and by removing it, you cannot access them.
That’s it. Now you have partitioned the SD card and used it to increase Internal memory of Android phone.

How To Make a Nandroid Backup on Android Devices

This post is about How To Make a Nandroid Backup on Android Devices 

NANDROID backup is used to create the backup in your Android device. NANDROID backup is also used to create backup of ROM installed in your Android device. You can easily restore nandroid backup when required. In this article we’ll be showing you about how to make a Nandroid backup and restore on Android devices when required. Check out the following guide to learn how to make a Nandroid backup and restore it.


In case of any damage you face before or after the backup, alltechsource team will not be held responsible. Do it on your own risk. Carefully follow the following steps to provide maximum safety to your device.

How to Make a NANDROID Backup:

Here is small guide to make nandroid backup.
  1. Before starting make sure that your Android device is rooted. You can learn it from this post.
  2. To boot your phone into ClockworkMod Recovery, reboot your Android device and boot it into Recovery Mode.
  3. Tap on Backup & Restore Option and select Yes to confirm backup option.
  4. Wait for a Nandroid backup on your device to be completed.
  5. Once backup is completed reboot your device.
You have successfully completed nandroid Backup. Before installing the custom ROM firmware on your Android device don’t forget to create the nandroid backup.

How to Restore a NANDROID Backup:

Once you have done NANDROID backup for your android device and want to restore it just follow the steps given below.
  1. Turn off your device and boot it into Recovery Mode.
  2. Navigate to Backup & Restore Option and tap on Restore.
  3. From here you can choose Backup file that you have already saved while performing the backup.
  4. Wait for some time until your data is restored.
I hope you are now able to backup your android device and restore it when needed. If you are facing any problem don’t forget to comment.

All secret Android codes


While developing anything, almost all developers leaves a back-door (also known as secret codes) means a user with some kind of such knowledge can get themselves into the system at a very deep level where you can get information which usually hide but you can get access to such information by entering some kind of codes on your any Android phone. So, today am telling you almost all Android codes which are not mostly known by mostly Android users, after seeing or following this post I hope that they will get something interesting. So, get connected.
The short-cuts or codes of Android am telling you are used in all versions included the latest one of Android devices or phones.
   Secret Codes                 Functions/Description

  • *#06#                                       To check IMEI of your device, enter this code.
  • *#0*#                                       To enter service menu on the very new Android phones.
  • *#0228#                                   To check battery status.
  • *#9090# / *#1111#                  To make device in Service mode.
  • *#*#4636#*#*                        To get information about battery, usage statistics and device.
  • *#*#34971539#*#*                 To get all information about camera.
  • *#12580*369#                         To get software and hardware info.
  • *#228#                                     For ADC Reading.
  • #7353#                                     To hide test menu 2/Self Test Mode.
  • ##7764726                               To hide service menu for Motorola Droid.
  • *#*#273283*255*663282*#*#*   For backup of our all media files.
  • *#*#232338#*#*                       It display the Wi-Fi mac address.
  • *#7465625#                               To view status of lock-phone.
  • *#*#3264#*#*                           To show RAM version.
  • *#*#44336#*#*                         To display build time and change list number.
  • *#*#232337#*#                         To see or display device’s Bluetooth address.
  • *#*#197328640#*#*                 It enables test mode for service.
  • *#*#8351#*#*                           To enable voice dial mode.
  • *#*#8350#*#*                           To disable the voice dial mode.
  • *#*#0842#*#*                           To test Back-light/vibration.
  • *#*#2664#*#*                           To test the touch-screen.
  • *#*#0289#*#*                           For Audio test.
  • *#*#0*#*#*                               For LCD display test.
  • *#*#232331#*#*                       To test Bluetooth of any Android device.
  • *#*#0283#*#*                           To perform a packet loop-back test.
  • *#*#1575#*#*                           For advanced GPS test.
  • *#*#1472365#*#*                     To Perform a quick GPS test.
  • *#*#0588#*#*                           To perform a proximity sensor test.
  • *#*#7262626#*#*                     To perform field test.
  • *#*#232339#*#*                       Testing Wireless LAN.
  • *#1234#                                     To check software version of S4.
  • *#9090#                                     To Diagnose configuration of device.
  • *#872564#                                 To control U-S-B logging.
  • *#9900#                                     System dump mode. 
  • *#*#7780#*#*                           Reset  to factory state.
  • *2767*3855#                             To format Android device.
  • *#*#4986*2650468#*#*          To get pda, phone, H/W and RF Call Date.  
  • *#*#1234#*#*                            To know about pda and firmware version.                                      
  • *#*#1111#*#*                           For FTA Software version. 
  • *#*#2222#*#*                           For FTA Hardware version.
  • *#*#7594#*#*                          To change power button behaviour once code enabled.      
  • *#*#8255#*#*                           To launch Google Talk service monitor.
Note :-

And one important thing, I want to share that if you think there’s some kind of problem in our above mentioned codes, inform us through comments, give your feedback (really important for us) and also discuss your problem with us regarding to this post. I feel very grateful to you if you give feedback to our posts because it makes us to understand how we can improve our posts or to resolve problems. So feel free to ask us about anything related to our posts.

Thursday, 11 December 2014

[Install and Run] Backtrack On Android



  1. A Rooted  Device [ Root Simple Android Phone Without Pc ]
  2. Backtrack ARM [ Download ]
  3. BusyBox [ Download ]
  4. Android Terminal and 5. android VNC
  5. If you are using PC then you need 7zip for extraction otherwise you can use zarchiver on you android phone. [ Download ]

Step to Install and Run Backtrack On Android

First of all extract the BT5-GNOME-ARM.7z. and copy the “BT5” folder and then put in your phone’s root directory. Here mine phone is /sdcard. The root directory is different for different mobile devices.
  1. Now install all the above apps Busybox, Android Terminal, Android Vnc.
  2. After installing BusyBox application open it and wait until it finish loading and then click on Smart install.
  3. Now open the android terminal and type the following command: su cd /sdcard/BT5 sh bootbt

    NOTE :-
    When you type su in terminal it will ask you for super user request and you have to tap on Grant.
  4. After this, type the following commands in terminal. export USER=root
  5. After entering vncpasswd the terminal will ask you to enter password. Enter the desired password and hit enter.
  6. Now type the following commands. tightvncserver -geometry 1280×720
  7. The terminal emulator will creates the localhost to connect it to VNC server. Now note the localhost port marked red below. Now minimize the terminal emulator.
  8. Open the android VNC and type the following settings.
Nickname : BT5
Password : your password here which you entered in terminal (step no.6)
Address : localhost
Port : 5906
NOTE : Make sure that your localhost’s port matches with terminal’s localhost. Here mine New ‘X’ desktop is localhost:6. Your may be different. So, in VNC type Port 590X where the “X” is the localhost in android terminal.
That’s it now just tap on connect to run the Backtrack on your android. So in this way you sucessfully install and run backtrack 5 on android.

Control Android From Pc

Control Android From Pc Control Android From Pc

Advantages and Features of Airdroid :-

  • You can also directly talk from PC.
  • Send and Receive SMS from PC.
  • Transfer apps,images,videos,files from PC to mobile through wireless network.
  • Install/Uninstall apps easily and also take complete back up of your device.
  • Trace your device when you lost it and much more features available in Airdroid.

How to Use Airdroid

  1. Download Airdroid on your android device Download
  2. After Download Install it and Open this app then Click on Start icon.
  3. After open it , copy the web address after clicking start icon.
  4. Now from PC browser go to then Enter the Web address you copied in step no 3.
  5. Make sure that your android device and PC is connected to same Network.
  6. If you are going for then you need to verify your device by entering pin/password or by scanning QR code.
Now you have successfully connected your android device to PC .You can start upload files by clicking files logo on desktop,you can chat from your PC and can have full access to your android device or android tablet.
That’s it Guys you are sucessfully control android from pc ! there are many features avalible once go through all of them and enjoy. If you face any problem feel free to discuss in below comments,

How to Recover Deleted Files On Android


1. Dumpster 

Dumpster is Just like the Recycle Bin on your desktop computer. It is the one of best tool for recovering accidentaly deleted file from your smart Android. It can recovers all deleted file on your android. It also very easy to use because of it’s user friendly interface. It has following features :-
  • Restore deleted pictures, music files, videos.
  • Undelete files (pdf, mp3, doc, avi, jpg, txt, etc.).
  • Restore deleted files with a single tap.
  • Preview your deleted pictures before recovering.
  • Auto-clean backup files at a given period.
  • Internet connection absolutely not required.
  • No need to root your device.
You can easily restore files with dumpster you have to just follow the below procedure :
Step 1 : First of all go to the application. Step 2: Where you can see all of your deleted file. Step 3: Tap on a file which you want to restore. Step 4: Now just select Restore Button. Step 5: Done your Deleted file is Restored.
NOTE : It can recover only when it is already installed on your android before the delete of your files/data.


2. ES File Explorer

The another method to restore deleted file is the one of the best android file manager. This file manager is full of features and the one of them is Recycle Bin.  I will also recommend you to use this application as file manager.
You can easily find the Recycle Bin option just by opening its tool menu. You have to ON it to use the Recycle Bin option.

How to Recover Files from Android SD Card [ Using PC ]

Using Android Data Recovery 

Sometimes you accidentaly format your SD card on you android or sometime your SD card got  corrupted. It can recover photos and videos from SD cards on Android devices, as well as contacts and messages on SIM cards. It has folowing Features :
  •  Accidentally deleted files from SD card.
  •  Formatted SD card.
  • SD card got corrupted or inaccessible.
  • Virus inflection.
  • Power failure.
It is easy to use you have to just connect you android device by enabling USB Debugging. When your android phone get connected then you have to simply scan you device and recover the desired files which displays on the screen.
So, this is all about Recover Deleted Files On Android phone. If you are facing any problem or needs any help just comment it below I will try my best to help you. Thanks !!

How to Root Any Android

How to Root Any Android How to Root Any Android

Rooting :
Android rooting is the process of allowing users of Android Phones, tablets, and other devices running the Android mobile operating system to get the full control and authority within Android’s system. When you root an Android smartphone it enables you to act as the administrator of the android phone. Rooting of Android provides you the facility to completely remove and replace your device’s operating system

As we told that now a day’s its very easy to root your Android device it’s all because of numerous Android rooting software, just like “One click Root”. This is a most preferred rooting software, it is designed to do one thing – root any Android Smartphone or tablet as quickly and safely as possible. OneClickRoot is the world’s top Android rooting application. With just a one click, you can root your Android Smartphone or tablet and have access to hundreds of new features. With the help of this application you can root your device just with one click, You should need to connect your phone to the pc via USB, download the application and rest all leave it to One Click Root.
Download [One Click Root]

Conclusion :

Though it has many advantages but rooting an Android Smartphone without following proper instructions can be risky. But with this such application’s you can easily root your device and can have much out of it as it will speed up your Android’s performance, access hundreds of new and exciting features and increase its battery life, and . And Rooting an Android device is totally safe and best thing you and your device can have !
So in this way root your android smartphone easily with this app OneClickRoot and Don’t forget to share